Wuhan Yiu Tate supply a full range SCG353A043 SCG353A044 supply SCG3 53A050 asco Spot 400325 - 117400425-342 400425-117 400425-142 pulse valve is divided into rectangular pulse valve and submerged rectangular pulse valve pulse valve working principle of high pressure gas from the inlet Access into the next chamber, 1, when the pulse valve without electricity, the gas constant through the upper and lower casing pipe and an orifice into which the decompression chamber, because the action of the spring spool blocked vent pressure hole, gas does not discharge, so that the gas pressure chamber and the lower chamber of the same pressure, but under the action of the spring, the diaphragm will blow port is blocked, the gas will not be flushed out. 2, when the pulse valve is energized, the spool in the electromagnetic force of the lift, pressure relief hole open, the gas emitted, because the role of the orifice constant pressure piping, pressure relief hole faster than a decompression chamber constant outflow pressure pipe flow velocity of gas, so that the vacuum chamber pressure is lower than the pressure of the gas chamber, the gas chamber of the gas from the top of the diaphragm to open the blow port, the gas injection. Submerged pulse valve works its structure and rectangular pulse valve basically the same, but no air intake, directly under the air bag as its air chamber, the principle is the same. NF8327B102 24DC NFB320B174 24VDC SCG353A044 SCG353A050 SCG353A051 10700001X TPL: 24029 coil 43005413 24VDC 238610-058-D 220/50 NF8327B102MS 24DC NF8551A321 24DC NF8327B002 220AC SCG353A047 SCG353A050 supply SCG3 53A050 asco spot SCG353.060 (Right Angle) SCXE353.060 (submerged) 400325 - 642 WBISXG551A301MO 24DC WSNF8320B102 24DC WSNF8327B112 24DC works solenoid valve has closed chamber, in different locations with holes, each hole connecting different tubing, middle piston chamber, both sides are two electromagnets, which face The magnet coil is energized which side will be attracted to the valve body, the movement of the control valve to open or close the drain hole different, and into the hole is always open, the hydraulic oil will enter a different discharge pipe, and the oil pressure to push the piston of the cylinder, the piston and drive the piston rod drive mechanism. So that the electrical current through the control solenoid on-off control of the mechanical motion. WT8551A001MS 220VAC NF8327B102 24VDC WSNF8327B102 24VDC VR7B2YAA2NGA supply SCG3 53A050 asco spot EF8210G004 24VDC 099257-006-D 238710-006-D 24VDC 238610-158-D EF8262G22 24VDC 8320G172MO 220/50 JKH8344G74MO 110/50 EFHC8210C013 125VDC WSNF8327B002 220AC supply SCG3 53A050 asco Spot